Waste Tyre/Rubber To Fuel Pyrolysis Plant in Indonesia

Beston Waste Tyre/rubber/plastic to oil pyrolysis plant is aimed to turn the waste into energy, which is also called waste tyre/plastic recycling plant. The main end products is composed of crude oil, carbon black, combustible gas and steel wire. According to different daily processing capacity, we provide batch waste tyre pyrolysis oil plants (BLJ-6 and BLJ-10), continuous pyrolysis plant (BLL-16) and BLL-20 fully continuous tire pyrolysis plants for you to choose.

1. Input material: Waste tire/rubber, Plastic, Medical waste
2. Output products: Fuel oil, carbon black, steel wire,gas
3. Capacity/batch: 6-24 tons.
4.Reactor plate thickness: 16mm
5.Rotary speed: 0.4-0.8 turn/min
6. Material of reactor:Q345R/Q245R/310S+Boiler plate/Stainless steel.
7. Cooling system:water condensing system.


Process Details of the Waste Tyre/Rubber To Fuel Oil Pyrolysis Plant

Pertreatment: You should treat the steel wire of the waste tyres before pyrolysis process. use the tyre crusher to process the waste tyres into small pieces, whose size should be under 50 mm.

1. Feed waste tyre/rubber into reactor by full-automatic feeding machine and make sure the door of feeding machine is closed.
2. Heat the reactor by using coal, charcoal, fuel gas, wood etc. as heating materials. The reactor will be slowly heated, and when the temperature reaches about 250℃, the oil gas will be formed.
3. The oil gas coming out from the reactor then goes to condensing system and becomes liquid oil. We adopt new-type condenser which can improve the oil yield efficiency and make the oil yield to the maximum.
4. The gas which can’t be liquefied under normal pressure will be designed to go back to combustion system through safety device. It can be recycled to heat the reactor as fuel, which will save energy for the whole working process.
5.The carbon black are discharged automatically while the waste materials are fed into reactor.

Technical Data of the  Waste Tyre/Rubber To Fuel Oil Pyrolysis Plant

Item Details
Model BLJ-6 BLJ-10 BLJ-16 BLL-20
Daily Capacity 6T 8T-10T 15-20T 20-24T
Working Method Batch Continuous Fully Continuous
Raw Materials Waste Plastic, Tyre, Rubber, Oil Sludge
Reactor Size D2.2*L6.0m D2.6*L6.6m D2.8*L7.1m D1.4*L11m
Pattern Horizontal & Rotary
Heating Materials Charcoal, Wood, Fuel Oil, Natural Gas, LPG, etc.
Total Power 24kw/h 30kw/h 54kw/h 71.4kw/h
Floor Area (L*W*H) 30*10*8m 30*10*8m 40*10*8m 45*25*10m
Operating Pressure Normal Pressure Constant Pressure
Cooling Method Water Cooling
Life span 5-8 Years

Custom Case-Pyrolysis Plant to Indonesia

Note: As a professional and Rich Experience tyre pyrolysis plant manufacturer, we have sold our plants to many countries, such as Indonesia, South Africa, Philippines, Malaysia, Thailand, Romania, Brazil, Jordan and so on. To provide the most suitable waste tyre/rubber pyrolysis recycling plant for our customers, Beston has never stopped research and upgrading our technology and device. Welcome to beston for inquiry the machine

End Products of the  Waste Tyre/Rubber To Fuel Oil Pyrolysis Plant

The serial number Name Use
1 Tyre oil (1) Can directly to sell
(2) Can use our distillation equipment for gasoline and diesel
(3) Can be used as a fuel
2 Carbon black (1) Can directly to sell
(2) Can use carbon black refining equipment to make fine carbon black
(3) Can use the carbon black particle granulation equipment
3 Scrap steel wire (1) Can directly to sell
(2) Can use hydraulic baling press do produce piece of easy transportation
and storage
4 Oil gas (1) Can pass gas spray gun used as fuel
(2) Excess gas can be storage system storage

Environmental friendly

1.Totally sealed reacting system, and slag discharging system, which prevent odor and ash releasing out.
2.Extra gas purifing system, remove chemical and impurity then recycle it into furnace for heating, clean and energy recycling.
3.6 generation hot some cleaning system, configured with filtering tank, liquid cleaning chamber, liquid sprayers and chimney, make emission meet EU standard.

    Interested in our products? Please give your inquiry in the form below. We will reply you in 6 hours.

    * Your Name

    * Your Email

    * Your Phone Number

    Your Company

    * Your Requirement

    *We respect your privacy, and will not share your personal information with other entities.